High Elastic Yarn

06μm, and the High Elastic Yarn coefficient is low, which reduces hanging flowers and intarsia, and improves the transfer rate.085). (4) Reduce the pipe elbow and increase the diameter of the pipe, the air flow is not easy to be too anxious, and ensure the smooth transportation of raw materials. (5)

Add concave-convex anti-sticking roller at the output of the dust cage. It is difficult to transfer during the carding process. 2. The working surface develops from a right-angled edge to a large arc surface, and the bottom of the tooth is rounded and negative angle, with the goal of moderate fiber capacity and good transfer.), to prevent the bell mouth from being clogged; use a cotton sliver with greater elasticity to shorten the length of the full tube; appropriately increase the tension of the coiler; in order to prevent overlapping of the slivers, the coil can be accelerated

The speed of the strip chassis; wipe the coiler inclined tube every day to control the output speed to reduce the problem of rubber roller and roller winding. The AD5030×02110-G doffer card clothing is designed with horizontal stripes, strong control ability, good transfer effect, suitable for high output; the AD4530×01870 doffer clothing has high tooth density and deep tooth profile, strong fiber control ability, suitable for production differences Chemical fiber. (2) Reduce the air suction area of ​​the lower dust cage, the ratio of the upper and lower dust cage collection areas is 7:3

, to avoid sticky roll caused by delamination. Such as AD4530B×02090, AD4530R×02090, AD4530BR×02090, etc. You can add an appropriate amount of anti-slip agent and water before packing.2.2. 2. The tooth shape is characterized by “always four big” (straight tooth tip, long tooth crest, large arc, large rake angle, large tooth pitch) ). (8) For the fibers that are extremely difficult to form and have many broken ends (such as rabbit hair), use loose fiber mixed strips, raise the cotton board, select the saw tooth for the cotton roller, and install the feeding hopper.

Megosztás a facebookon